<ruby id="hew0n"></ruby>
<source id="hew0n"><nav id="hew0n"></nav></source>
  • <ruby id="hew0n"></ruby>
    <strong id="hew0n"><pre id="hew0n"><samp id="hew0n"></samp></pre></strong>

    <rt id="hew0n"></rt>
      1. <cite id="hew0n"><li id="hew0n"></li></cite>
        <u id="hew0n"><form id="hew0n"><samp id="hew0n"></samp></form></u>
      2. 保定漆彩建筑裝飾工程有限公司
        ?

        資訊分類

        更多

        產品分類

        更多

        最新資訊

        更多
        地址:河北省保定市順平縣永平大街118號
        郵箱:40423960@qq.com
        電話:15081222333 0312-7615081
        傳真:0312-7655558

        新聞中心

        當前位置:首頁 > 新聞中心 > 客戶對保定環氧地坪工程平整度檢測方法

        客戶對保定環氧地坪工程平整度檢測方法

        2020-12-02

        保定環氧地坪漆施工是否平整是直接影響到它的使用價值的,所以在施工當中非常的重要,不過有一點也是我們比較擔心的,就是這種保定環氧地坪從表面上看是很難看出它是否平整呢?那么這種保定環氧地坪的施工到底應該如何去判斷呢?就讓小編來告訴大家。保定環氧地坪的平整度檢測主要有兩種方法。一種是我們常規使用的方法,通過使用靠尺來丈量保定環氧地坪平整度。一般為2米靠尺,2米范圍內落差不超過5mm。

        Epoxy floor paint construction is a direct impact on its use value, so it is very important in the construction, but one thing we are more concerned about, is this kind of floor from the surface is very difficult to see whether it is flat? Then, how should the construction of epoxy floor be judged? Let Xiaobian tell you. 

        There are two ways to detect the evenness of epoxy floor. One is our regular method of measuring the smoothness of the floor by using a ruler. It is generally 2 meters in length and within 2 meters, the difference is not more than 5mm.

        鋪在地面上,取最高地和最低點,看落差是多少。

        Lay on the ground, take the highest and lowest point, and see the difference.

        但用靠尺的方法檢測地面的平整度,會存在一些缺陷。如圖:

        However, there will be some defects in measuring the flatness of the ground by using the ruler. Figure:

        當碰到多處落差地段的時候,靠尺法無法表達,并且假如多處落差都小于5mm,那用靠尺法是通過檢測的,但實際地面的平整度是不行的(波浪紋)。

        When it comes to a lot of falls, the ruler method can not be expressed, and if many falls are less than 5 mm, then the ruler method is used to detect, but the actual ground flatness is not (wavy).

        另外一種重慶保定環氧地坪平整度的檢測方法是美國混凝土協會和加拿大尺度協會聯合推出的F數值。這個檢測方法有兩個數值,FF為平整度,FL為高差值

        Another test method for the flatness of epoxy floors in Chongqing is the F value jointly developed by the American Concrete Association and the Canadian Scale Association. This detection method has two values, FF is flatness and FL is high difference value.

        F數值一般的寫法是 FF / FL 。如:FF 25 /FL 20 。

        The F value is generally written in FF / FL. For example, FF 25 /FL 20.

        因為F數值能更正確的表達地坪的平整度,所以在超平地坪中常常使用。但因為F數值的檢測方法比擬靠尺法更復雜,并且保定環氧地坪的平整基本是順平,沒有太多的平整度糾紛,所以當前使用最廣泛的還是靠尺法

        Because the F value can express the evenness of the floor more accurately, it is often used in the super flat floor. But because the F value detection method is more complex than the rule method, and the epoxy floor is basically smooth, there are not too many flatness disputes, so the current most widely used still depends on the rule method.



        標簽:   保定環氧地坪 地坪 保定環氧地坪漆 保定環氧地坪施工
        超碰在线播放视频av,国产精品香蕉视频在线,国产一区精品视频一区二区,一本道av无码
        <ruby id="hew0n"></ruby>
        <source id="hew0n"><nav id="hew0n"></nav></source>
      3. <ruby id="hew0n"></ruby>
        <strong id="hew0n"><pre id="hew0n"><samp id="hew0n"></samp></pre></strong>

        <rt id="hew0n"></rt>
          1. <cite id="hew0n"><li id="hew0n"></li></cite>
            <u id="hew0n"><form id="hew0n"><samp id="hew0n"></samp></form></u>